Pile Weatherstrip Configurator
Spec pile weatherstrip by backing, pile, fin, and application.
Vendor-agnostic. Pick what you need — backing geometry, backing width, pile height, fin construction, application — and get the matching SB5 SKU plus the brand-equivalent reference for every major U.S. supplier's product family.
Side rail and head rail tracks. Wind-resistance pile (≥ 12 mm) recommended for HVHZ zones.
Captured in an extrusion's T-slot. Most common for OEM production runs.
One ultrasonic-welded center fin. ~30% improvement in air infiltration vs. no-fin pile.
Your Spec Summary
T-Slot 4.8 mm × 9.0 mm pile · single fin (finseal)
AAMA 701/702-23 verified · UV-stabilized polypropylene · motorized retractable screen application
Matching SB5 SKU
Pile Weatherstrip (Standard Matrix) →
Full AAMA 701/702-23 backing × pile × fin matrix — covers most T-slot configurations.
Matching SB5 SKU
T-Slot Brush Seal →
Brush-style alternate to pile — denser filament, often used where higher abrasion or wind load applies.
Spec-equivalent to
Ultrafab Ultra-Pile class · Schlegel Poly-Bond class · AmesburyTruth Series 60/61/62 class
Reference only — SB5 is not affiliated with any of the brands listed. The SB5 SKU above is built to the same AAMA 701/702-23 published spec.
How this tool works
Pile weatherstrip is built to a standard, not to a brand.
Most fenestration component buyers shop pile weatherstrip by brand name first — Ultra-Pile, Poly-Bond, Q-Lon, Series 60. But every one of those brand products is built to the same underlying spec: AAMA 701/702-23. The brand is the label; the spec is the part.
This configurator lets you spec the part by its actual dimensions — backing geometry × backing width × pile height × fin construction × application — and shows the matching SB5 SKU directly. The brand-equivalent callout tells you which incumbent supplier's product family covers the same spec, so you can switch sourcing without retooling.
Why this is faster than browsing a catalog: brand catalogs index by product name, not by spec. To find the right Ultra-Pile, you have to know it's called Ultra-Pile. With this tool, you can spec it dimensionally — the way the original sash design called for — and the SKU comes back automatically.
Reference standards
AAMA 701/702-23 defines the dimensional matrix (backing widths, pile heights), air infiltration performance classes (Class A), and material requirements (UV-stabilized polypropylene). SB5 sources to the same standard direct from vetted overseas factories, inspects every production run at Plant City, and warehouses your spec locally after first order.
What you get
The operating standards behind every SB5 quote
Vetted Factories
Audited & qualified before any spec ships
Quality Inspected
Every run sample-checked before release
Warehoused in Florida
Plant City inventory for your spec
Samples Available
Verify on your bench before you commit
Direct From Manufacturer
Factory pricing without distributor stack
OEM Spec Reserved
Your dimensions, color & packaging on hand
Related Tools
More SB5 specification tools
Component family hub
Components by Type →
Browse every SKU grouped by what the part does.
System anatomy
Systems Explorer →
Interactive diagrams of motorized screens, awnings, and rolling shutters with every part labeled.
ROI calculator
Cost Savings Calculator →
Estimate your switching savings to SB5 across unit cost, admin, and inventory carrying.
Got your spec? Let's quote it.
Use the configurator above to dial in your dimensions, then click through to request a quote — or send us a sample of your current pile and we'll reverse-engineer the match.