Industries We Serve
Shutters
Rolling, accordion, Bahama, colonial & hurricane shutter components
Miami-Dade
NOA-Spec Components
304/316
Coastal Stainless
9 sizes
Slat Profiles Covered
Components for Shutters
Nylon wind-lock clips matched to every standard slat profile, EPDM bottom-bar bulb seals, aluminum guide rails in 6063-T6, F-track and H-header storm-panel mounting hardware in 304/316 stainless for Miami-Dade NOA assemblies, accordion carriage wheels and pivots, Bahama and Colonial pintle and strap hinges in cast iron, stainless, bronze, and cast aluminum, and crank/gear assemblies for manual operation and motor override.
Florida HVHZ (high-velocity hurricane zone) and similar coastal jurisdictions drive recurring shutter component demand — every Miami-Dade NOA-tested rolling, accordion, Bahama, or colonial assembly is a load-path stack of slat clips, seals, hinges, and stainless fasteners. SB5 sources to the dimensional consistency these load-path systems require.
Applications
How Our Components Are Used
Rolling Shutter Slat Hardware
Glass-filled nylon 6/6 wind-lock clips matched to 37, 39, 40, 44, 55, 56, 57, 63, and 77 mm slat profiles; cast/stamped end locks; aluminum bottom bars in 51×7.5 to 76×28 mm; storm reinforcement bars.
Hurricane Storm Panel Hardware
F-track 146″, H-header 2″, studded angle, wing nuts ¼-20, and sidewalk bolts in aluminum 6063-T6 + 304/316 stainless — Miami-Dade NOA component-grade per ASTM B117.
Accordion Shutter Mechanisms
#10×3″ carriage wheels in UV-stabilized nylon 6/6, 7/8 mm hex shaft pivots in 304/316 stainless, snap-fit track covers, and CF/HV/L-handle/T-handle locks with brass cylinders.
Bahama & Colonial Hinges
Continuous sliding hinge extrusions (Bahama), pintle and strap sets in cast iron / 304-316 SS / cast bronze / cast aluminum, fixed and adjustable stay arms, and L-hinge / strap sets for colonial systems.
Guide Rail & Seal Components
Aluminum 6063-T5/T6 guide rails 41×70 to 76×28 mm in 12'/19' sticks; EPDM bottom-bar bulb seals 12–25 mm; siliconized PP pile for guide channels per AAMA 701/702.
Speak Your Language
We Know Your Terminology
Different industries call the same components by different names. Here's how our products map to shutters terminology.
SB5 Product
Your Industry Calls It
Wind-Lock Clip
End Retention / Slat Stop
Bulb Seal
Bottom Bar Gasket / Sweep
Guide Rail
Side Track / Channel
Pintle Hinge
Shutter Pin / Hook Hinge
F-Track
Storm Panel Header / Mount
Technical Specifications
Key Specs for Shutters
- Slat profiles: 37, 39, 40, 44, 55, 56, 57, 63, 77 mm
- Guide rail extrusions: 41×70, 53×22, 53×60, 69×23, 76×28 mm
- Bottom bar bulb seals: 12–25 mm EPDM / TPV / flexible PVC
- Storm panel hardware: 304/316 stainless per ASTM B117
- Standards referenced: Miami-Dade NOA, TAS 201/202/203, ASTM E330, DASMA 108/115
Vetted Factories
Audited & qualified before any spec ships
Quality Inspected
Every run sample-checked before release
Warehoused in Florida
Plant City inventory for your spec
Samples Available
Verify on your bench before you commit
Direct From Manufacturer
Factory pricing without distributor stack
OEM Spec Reserved
Your dimensions, color & packaging on hand
Need Components for Shutters?
Send us your specs, current part numbers, and expected usage. We'll quote fast and produce free verification samples tailored to your application.
