Spec-Equivalent Cross-Reference
Reese Enterprises Alternative
Spec-equivalent SB5 SKUs for the commercial door perimeter seal family
Reese is a commercial-door perimeter sealing supplier — door sweeps, thresholds, astragals, jamb seals, and weatherstrip extrusions. They publish a public price book PDF, sell cut-to-size with a +½″/+1″ trim allowance convention that SB5 mirrors, and lean on part-number-led catalog organization. SB5 covers the same BHMA A156.22 / A156.21 spec families direct from vetted factories.
About this cross-reference
SB5 is not affiliated with Reese Enterprises. Reese Enterprises is a separate company; their trademarks belong to them. This page shows which SB5 components are built to the same published specification standards (BHMA A156.22 Grade 1; UL 10C / 1784; NFPA 80/105, ASTM D2000; ANSI/DASMA 105, 112; BHMA A156.22, BHMA A156.22 Grade 1; UL 10C / 10B / 1784; NFPA 80/105, BHMA A156.21; ADA/ANSI A117.1) so OEM buyers searching for a Reese Enterprises-equivalent can find the matching SB5 SKU. Specs listed for Reese Enterprises products reflect the public industry standard — not Reese Enterprises's proprietary tooling, formulation, or branding.
Side-by-Side Spec Comparison
Reese Enterprises products and their SB5 spec-equivalents
Reese Enterprises product family
372A-class aluminum-retainer brush sweep
Commercial door bottom brush sweep with type-6 nylon brush in a 6063-T5 aluminum retainer profile. Cut to door width with +½"/+1" trim allowance on lengths under and over 47 inches.
SB5 spec-equivalent
Nylon / PP Brush Strip with Aluminum Holder →
Aluminum-holder brush strip for garage door perimeter sealing, side jambs, and lintel headers. Nylon 6 or polypropylene filament in 0.006"–0.012" diameter; 1"–4" trim heights; 7/8"–3" aluminum 6063-T5…
| Spec | What the standard requires | What SB5 delivers |
|---|---|---|
| Retainer | 6063-T5 aluminum extrusion, mill / clear / dark bronze finish | 6063-T5 aluminum, multiple finish options |
| Brush Trim Heights | 5/8" through 1-1/2" standard heights | 1" – 4" trim heights |
| Cut-to-Size Convention | +½" on lengths ≤47", +1" on lengths ≥48" | +½"/+1" trim convention mirrored |
| Mounting Profile | 45° / 90° / 180° aluminum retainer angles | 45° / 90° / 180° all stocked |
Ready to spec out Nylon / PP Brush Strip with Aluminum Holder?
Reese Enterprises product family
430A / 521C-class door bottom astragal
EPDM or vinyl bottom astragal in a T-stem profile, used at the bottom edge of commercial doors and sectional door assemblies for floor sealing.
SB5 spec-equivalent
T-End Bottom Astragal →
Industry-standard T-end bottom astragal seal for sectional garage doors. Single-T and double-T stem widths (¼", 5/16"), flat sections from 2½" to 4½", and door-width lengths from 8 ft through 20 ft. A…
| Spec | What the standard requires | What SB5 delivers |
|---|---|---|
| Stem Profile | ¼" or 5/16" T-stem | ¼" and 5/16" stems (single-T and double-T) |
| Flat Width | 2½" – 4½" flat section | 2½" – 4½" flat section |
| Material Options | EPDM, TPV, flexible PVC | EPDM / TPV / flexible PVC |
| Length Range | Cut to door width 8 – 20 ft | 8 – 20 ft door widths |
Ready to spec out T-End Bottom Astragal?
Reese Enterprises product family
PERFEC nylon brush sweep
Commercial-duty aluminum-retainer brush sweep for door bottoms, fire-rated and UL 1784 smoke-rated assemblies.
SB5 spec-equivalent
Nylon Brush Door Sweep →
Type-6 nylon brush door sweep in 6063-T5 aluminum retainer. 5/8" to 1-1/2" brush trim heights; 36, 48, 72, 84, and 96" lengths. BHMA A156.22 Grade 1; UL 10C / 10B / 1784 fire- and smoke-rated; NFPA 80…
| Spec | What the standard requires | What SB5 delivers |
|---|---|---|
| Brush Trim Heights | 5/8" – 1-1/2" | 5/8" – 1-1/2" stocked |
| Retainer | Aluminum 6063-T5 | Aluminum 6063-T5 |
| Cut-to-Size | +½"/+1" trim allowance | +½"/+1" trim convention mirrored |
Ready to spec out Nylon Brush Door Sweep?
Reese Enterprises product family
Aluminum saddle threshold
Mill or anodized aluminum saddle threshold for commercial door openings, ADA-compliant rise per BHMA A156.21.
SB5 spec-equivalent
Saddle Threshold →
Aluminum 6063-T5 saddle threshold for commercial door openings. 3" to 6" widths; 1/4" to 1" heights. Mill, clear-anodized, or dark-bronze finishes. BHMA A156.21 and ADA/ANSI A117.1 compliant.
| Spec | What the standard requires | What SB5 delivers |
|---|---|---|
| Material | Aluminum 6063-T5 | Aluminum 6063-T5 |
| Widths | 3" – 6" | 3" – 6" widths |
| ADA Rise | ≤ 1/2" rise | ADA-compliant variants available |
Ready to spec out Saddle Threshold?
What you get every time
The operating standards behind every SB5 order
Vetted Factories
Audited & qualified before any spec ships
Quality Inspected
Every run sample-checked before release
Warehoused in Florida
Plant City inventory for your spec
Samples Available
Verify on your bench before you commit
Direct From Manufacturer
Factory pricing without distributor stack
OEM Spec Reserved
Your dimensions, color & packaging on hand
Send us your Reese Enterprises part number.
We'll map it to the spec-equivalent SB5 SKU, send a verification sample, and quote you on the same standard you already trust.
SB5 is not affiliated with Reese Enterprises. All trademarks remain the property of their respective owners.